{"id":304,"date":"2018-09-02T19:34:33","date_gmt":"2018-09-02T17:34:33","guid":{"rendered":"http:\/\/a.francoise.free.fr\/?page_id=304"},"modified":"2022-07-29T16:39:45","modified_gmt":"2022-07-29T14:39:45","slug":"cura-by-dagoma","status":"publish","type":"page","link":"https:\/\/www.aacmb.fr\/wordpress\/cura-by-dagoma\/","title":{"rendered":"Les slicers – Cura by Dagoma"},"content":{"rendered":"

Retour<\/span><\/a><\/p>\n

Pour une imprimante d’entr\u00e9e de gamme, Dagoma a eu la tr\u00e8s bonne id\u00e9e de fournir un slicer totalement configur\u00e9 nativement pour \u00e9viter \u00e0 l’utilisateur de se poser trop de questions.
\nIl s’agit d’une version customis\u00e9e du slicer Cura (dont je parlerais dans une autre page).
\nLe mode op\u00e9ratoire est on ne peut plus simple :
\na) vous lancez le logiciel<\/u>
\n\"\"
\nb) vous charger votre mod\u00e8le<\/u>
\n\"\"
\nA ce stade, vous obtenez d\u00e9j\u00e0 une information sur le temps d’impression, la longueur de filament n\u00e9cessaire, le poids de la pi\u00e8ce et le co\u00fbt (selon des param\u00e8tres que j’expliquerais plus tard).
\nc) vous modifiez ou non les caract\u00e9ristiques de votre mod\u00e8le<\/u>
\nLorsque vous s\u00e9lectionnez votre mod\u00e8le, 3 ic\u00f4nes apparaissent en bas \u00e0 gauche de la fen\u00eatre.
\n\"\"
\nVous pouvez \u00e0 partir de l\u00e0 effectuer des rotations de votre pi\u00e8ce, modifier sa taille, ou r\u00e9aliser des sym\u00e9tries.
\nUn clic droit sur la pi\u00e8ce permet aussi de r\u00e9aliser directement d’autres op\u00e9rations : duplication de votre pi\u00e8ce si vous souhaitez imprimer en une fois plusieurs exemplaires par exemple.
\nd) vous configurez les quelques param\u00e8tres d’impression<\/u>
\nLa partie droite de l’\u00e9cran vous permet de param\u00e9trer les \u00e9l\u00e9ments principaux de votre future impression.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n\n
    \n
  • Le type de filament parmi la liste des filaments vendus par Dagoma)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • La temp\u00e9rature<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • Le pourcentage de remplissage de la pi\u00e8ce<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • La qualit\u00e9 d’impression (\u00e9paisseur de la couche)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • La version de la t\u00eate d’impression (V2 ou V3)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • L’impression ou non de supports<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • L’utilisation ou non du palpeur de plan\u00e9it\u00e9 du plateau<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • L’utilisation ou non de radeau (pour am\u00e9liorer la surface d’adh\u00e9sion)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
<\/td>\n\n
    \n
  • La possibilit\u00e9 de mettre des pauses d’impression entre certaines couches pour changer de filament (manuellement)<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    e) Et vous g\u00e9n\u00e9rez le fichier G-Code<\/u>
    \nIl vous reste \u00e0 copier ce fichier sur la carte SD de l’imprimante et \u00e0 lancer l’impression.
    \nOn ne peut pas tout faire avec ce Slicer, mais il conviendra dans la plupart des cas, sans avoir \u00e0 trop se poser de questions.
    \nPour aller plus loin …<\/b>
    \nPour personnaliser ainsi Cura, Dagoma s’est appuy\u00e9 sur un fichier de param\u00e9trage qui se trouve dans un sous-r\u00e9pertoire du r\u00e9pertoire d’installation : resources\/xml.
    \nDagoma vendant plusieurs mod\u00e8le d’imprimante, vous trouverez un fichier par mod\u00e8le.
    \nC’est dans ces fichiers que l’on retrouve les param\u00e8tres principaux de configuration, qui pourront \u00eatre repris pour configurer manuellement par la suite votre slicer pr\u00e9f\u00e9r\u00e9.
    \nEn fin de cette page, vous trouverez le contenu du fichier fourni par Dagoma pour mon mod\u00e8le d’imprimante.
    \nCe fichier est int\u00e9ressant car on y retrouve les valeurs de certains param\u00e8tres \u00ab\u00a0standard\u00a0\u00bb qui pourront servir de base pour la configuration d’autres slicer.<\/p>\n

    \n

    <?xml version=\u00a0\u00bb1.0″ encoding=\u00a0\u00bbutf-8″?><\/span>
    \n<!– XML for DiscoEasy200 – 2018\/21\/02 –><\/span>
    \n<Dagoma><\/span>
    \n<!– Filament definitions –><\/span>
    \n<Filaments><\/span>
    \n<Filament name=\u00a0\u00bbPLA Chromatik\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.74<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>4<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>33.20<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbSilver\u00a0\u00bb><\/span>
    \n<model_colour>#C0C0C0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPearl white\u00a0\u00bb><\/span>
    \n<model_colour>#eeebd9<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPearl blue\u00a0\u00bb><\/span>
    \n<model_colour>#4FA1C2<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbCream white\u00a0\u00bb><\/span>
    \n<model_colour>#FFFAFA<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBaby blue\u00a0\u00bb><\/span>
    \n<model_colour>#89cff0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBronze\u00a0\u00bb><\/span>
    \n<model_colour>#cd7f32<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGrey\u00a0\u00bb><\/span>
    \n<model_colour>#808080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbFluor yellow\u00a0\u00bb><\/span>
    \n<model_colour>#ccff00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPurple\u00a0\u00bb><\/span>
    \n<model_colour>#800080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBrown\u00a0\u00bb><\/span>
    \n<model_colour>#964B00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGold\u00a0\u00bb><\/span>
    \n<model_colour>#FFD700<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbFluor orange\u00a0\u00bb><\/span>
    \n<model_colour>#FE3917<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPeach\u00a0\u00bb><\/span>
    \n<model_colour>#FFDAB9<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBaby green\u00a0\u00bb><\/span>
    \n<model_colour>#B2F187<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGlow green\u00a0\u00bb><\/span>
    \n<model_colour>#51ff0d<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPink\u00a0\u00bb><\/span>
    \n<model_colour>#FFC0CB<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#ff0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbFluor green\u00a0\u00bb><\/span>
    \n<model_colour>#B4FE00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDark green\u00a0\u00bb><\/span>
    \n<model_colour>#006400<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPrimary red\u00a0\u00bb><\/span>
    \n<model_colour>#ff0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbSilver glitter\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#C0C0C0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbAzure\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#007FFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbElectric blue\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#0892d0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOcean blue\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#0077be<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDesert\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#EDC9AF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLime green\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#32CD32<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLemon yellow\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#fff44f<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbSun yellow\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#FDB813<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbCamouflage\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#78866b<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbMagenta\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#FF00FF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbChocolate brown\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#8B4513<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBaby pink\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#F4C2C2<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRubin red\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#CA005D<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbIvory\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#FFFFF0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbViolet\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#EE82EE<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbMustard\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#ffdb58<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbNatural\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbSolid green\u00a0\u00bb><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<model_colour>#00FF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA PolyPlus\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>46.53<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#FF0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbNatural\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbTranslucent blue\u00a0\u00bb><\/span>
    \n<model_colour>#0000FF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbTranslucent red\u00a0\u00bb><\/span>
    \n<model_colour>#FF0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbTranslucent orange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbTranslucent yellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlue\u00a0\u00bb><\/span>
    \n<model_colour>#0000ff<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA PolyMax\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>95<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>59.86<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbBlue\u00a0\u00bb><\/span>
    \n<model_colour>#0000FF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#FF000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA OctoFiber\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.74<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>4<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>39.98<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbGrey\u00a0\u00bb><\/span>
    \n<model_colour>#808080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbSilver\u00a0\u00bb><\/span>
    \n<model_colour>#C0C0C0<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBronze\u00a0\u00bb><\/span>
    \n<model_colour>#cd7f32<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#ff0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlue\u00a0\u00bb><\/span>
    \n<model_colour>#0000ff<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#ffffff<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPearl white\u00a0\u00bb><\/span>
    \n<model_colour>#eeebd9<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPearl blue\u00a0\u00bb><\/span>
    \n<model_colour>#4FA1C2<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGreen\u00a0\u00bb><\/span>
    \n<model_colour>#00ff00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPurple\u00a0\u00bb><\/span>
    \n<model_colour>#800080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBrown\u00a0\u00bb><\/span>
    \n<model_colour>#964B00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbCarbon black\u00a0\u00bb><\/span>
    \n<model_colour>#293542<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPink\u00a0\u00bb><\/span>
    \n<model_colour>#FFC0CB<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGold\u00a0\u00bb><\/span>
    \n<model_colour>#FFD700<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDark green\u00a0\u00bb><\/span>
    \n<model_colour>#006400<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDark blue\u00a0\u00bb><\/span>
    \n<model_colour>#000064<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPhosphorescent\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbBiosourced PLA OWA Armor\u00a0\u00bb><\/span>
    \n<print_temperature>190<\/print_temperature><\/span>
    \n<filament_diameter>1.74<\/filament_diameter><\/span>
    \n<filament_flow>99<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>46.53<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#FF0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGreen\u00a0\u00bb><\/span>
    \n<model_colour>#00FF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLight blue\u00a0\u00bb><\/span>
    \n<model_colour>#ADD8E6<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDark blue\u00a0\u00bb><\/span>
    \n<model_colour>#000064<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPink\u00a0\u00bb><\/span>
    \n<model_colour>#FFC0CB<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGrey\u00a0\u00bb><\/span>
    \n<model_colour>#808080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA Filo3D\u00a0\u00bb><\/span>
    \n<print_temperature>205<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>59.6<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbMetallic gray\u00a0\u00bb><\/span>
    \n<model_colour>#808080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbNeon green\u00a0\u00bb><\/span>
    \n<model_colour>#39FF14<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbDark blue\u00a0\u00bb><\/span>
    \n<model_colour>#000064<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbFire red\u00a0\u00bb><\/span>
    \n<print_temperature>220<\/print_temperature><\/span>
    \n<model_colour>#FF0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbMate black\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLemon yellow\u00a0\u00bb><\/span>
    \n<model_colour>#eeee00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGreen\u00a0\u00bb><\/span>
    \n<print_temperature>200<\/print_temperature><\/span>
    \n<model_colour>#00ff00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbNatural\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA PolyFlex\u00a0\u00bb><\/span>
    \n<print_temperature>230<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>115<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>8<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>66.53<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<layer_height>0.15<\/layer_height><\/span>
    \n<solid_layer_thickness>1.05<\/solid_layer_thickness><\/span>
    \n<wall_thickness>1.2<\/wall_thickness><\/span>
    \n<print_speed>35<\/print_speed><\/span>
    \n<travel_speed>50<\/travel_speed><\/span>
    \n<bottom_layer_speed>15<\/bottom_layer_speed><\/span>
    \n<infill_speed>40<\/infill_speed><\/span>
    \n<inset0_speed>25<\/inset0_speed><\/span>
    \n<insetx_speed>35<\/insetx_speed><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA PolyWood\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>46.53<\/filament_cost_kg><\/span>
    \n<model_colour>#855E42<\/model_colour><\/span>
    \n<layer_height>0.15<\/layer_height><\/span>
    \n<solid_layer_thickness>1.05<\/solid_layer_thickness><\/span>
    \n<wall_thickness>1.2<\/wall_thickness><\/span>
    \n<print_speed>50<\/print_speed><\/span>
    \n<travel_speed>60<\/travel_speed><\/span>
    \n<bottom_layer_speed>17<\/bottom_layer_speed><\/span>
    \n<infill_speed>50<\/infill_speed><\/span>
    \n<inset0_speed>40<\/inset0_speed><\/span>
    \n<insetx_speed>45<\/insetx_speed><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbPLA Fiberlogy\u00a0\u00bb><\/span>
    \n<print_temperature>210<\/print_temperature><\/span>
    \n<filament_diameter>1.74<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>41.05<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<Color name=\u00a0\u00bbBeige\u00a0\u00bb><\/span>
    \n<model_colour>#F5F5DC<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBlack\u00a0\u00bb><\/span>
    \n<model_colour>#191919<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLight blue\u00a0\u00bb><\/span>
    \n<model_colour>#ADD8E6<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbBrown\u00a0\u00bb><\/span>
    \n<model_colour>#964B00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbCherry red\u00a0\u00bb><\/span>
    \n<model_colour>#DC143C<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbAnthracite\u00a0\u00bb><\/span>
    \n<model_colour>#4A5054<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLight gray\u00a0\u00bb><\/span>
    \n<model_colour>#D3D3D3<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbGreen\u00a0\u00bb><\/span>
    \n<model_colour>#00ff00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbLight green\u00a0\u00bb><\/span>
    \n<model_colour>#90EE90<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbNavy blue\u00a0\u00bb><\/span>
    \n<model_colour>#000080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbOrange\u00a0\u00bb><\/span>
    \n<model_colour>#FFA500<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPink\u00a0\u00bb><\/span>
    \n<model_colour>#FFC0CB<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbPurple\u00a0\u00bb><\/span>
    \n<model_colour>#800080<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbRed\u00a0\u00bb><\/span>
    \n<model_colour>#FF0000<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbWhite\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbYellow\u00a0\u00bb><\/span>
    \n<model_colour>#FFFF00<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<Color name=\u00a0\u00bbTranslucent\u00a0\u00bb><\/span>
    \n<model_colour>#FFFFFF<\/model_colour><\/span>
    \n<\/Color><\/span>
    \n<\/Filament><\/span>
    \n<Filament name=\u00a0\u00bbOther PLA type\u00a0\u00bb><\/span>
    \n<print_temperature>205<\/print_temperature><\/span>
    \n<filament_diameter>1.75<\/filament_diameter><\/span>
    \n<filament_flow>100<\/filament_flow><\/span>
    \n<retraction_speed>50<\/retraction_speed><\/span>
    \n<retraction_amount>3.5<\/retraction_amount><\/span>
    \n<filament_physical_density>1270<\/filament_physical_density><\/span>
    \n<filament_cost_kg>46<\/filament_cost_kg><\/span>
    \n<model_colour>#FF9B00<\/model_colour><\/span>
    \n<\/Filament><\/span>
    \n<\/Filaments><\/span>
    \n<!– Filling definitions –><\/span>
    \n<Fillings><\/span>
    \n<Filling name=\u00a0\u00bbVase\u00a0\u00bb><\/span>
    \n<spiralize>True<\/spiralize><\/span>
    \n<\/Filling><\/span>
    \n<Filling name=\u00a0\u00bbHollow (0%)\u00a0\u00bb><\/span>
    \n<fill_density>0<\/fill_density><\/span>
    \n<\/Filling><\/span>
    \n<Filling name=\u00a0\u00bbFilling (17%)\u00a0\u00bb><\/span>
    \n<fill_density>17<\/fill_density><\/span>
    \n<\/Filling><\/span>
    \n<Filling name=\u00a0\u00bbReinforced (33%)\u00a0\u00bb><\/span>
    \n<fill_density>33<\/fill_density><\/span>
    \n<\/Filling><\/span>
    \n<\/Fillings><\/span>
    \n<!– Quality definitions –><\/span>
    \n<Precisions><\/span>
    \n<Precision name=\u00a0\u00bbFast (0.2mm)\u00a0\u00bb><\/span>
    \n<layer_height>0.2<\/layer_height><\/span>
    \n<solid_layer_thickness>1<\/solid_layer_thickness><\/span>
    \n<wall_thickness>0.8<\/wall_thickness><\/span>
    \n<print_speed>60<\/print_speed><\/span>
    \n<temp_preci>10<\/temp_preci><\/span>
    \n<travel_speed>100<\/travel_speed><\/span>
    \n<bottom_layer_speed>17<\/bottom_layer_speed><\/span>
    \n<infill_speed>60<\/infill_speed><\/span>
    \n<inset0_speed>50<\/inset0_speed><\/span>
    \n<insetx_speed>60<\/insetx_speed><\/span>
    \n<\/Precision><\/span>
    \n<Precision name=\u00a0\u00bbStandard (0.15mm)\u00a0\u00bb><\/span>
    \n<layer_height>0.15<\/layer_height><\/span>
    \n<solid_layer_thickness>1.05<\/solid_layer_thickness><\/span>
    \n<wall_thickness>1.2<\/wall_thickness><\/span>
    \n<print_speed>50<\/print_speed><\/span>
    \n<temp_preci>5<\/temp_preci><\/span>
    \n<travel_speed>60<\/travel_speed><\/span>
    \n<bottom_layer_speed>17<\/bottom_layer_speed><\/span>
    \n<infill_speed>50<\/infill_speed><\/span>
    \n<inset0_speed>40<\/inset0_speed><\/span>
    \n<insetx_speed>45<\/insetx_speed><\/span>
    \n<\/Precision><\/span>
    \n<Precision name=\u00a0\u00bbThin (0.1mm)\u00a0\u00bb><\/span>
    \n<layer_height>0.1<\/layer_height><\/span>
    \n<solid_layer_thickness>1<\/solid_layer_thickness><\/span>
    \n<wall_thickness>1.2<\/wall_thickness><\/span>
    \n<print_speed>35<\/print_speed><\/span>
    \n<temp_preci>0<\/temp_preci><\/span>
    \n<travel_speed>50<\/travel_speed><\/span>
    \n<bottom_layer_speed>15<\/bottom_layer_speed><\/span>
    \n<infill_speed>40<\/infill_speed><\/span>
    \n<inset0_speed>25<\/inset0_speed><\/span>
    \n<insetx_speed>35<\/insetx_speed><\/span>
    \n<\/Precision><\/span>
    \n<\/Precisions><\/span>
    \n<!– Printer head definitions –><\/span>
    \n<PrinterHeads><\/span>
    \n<PrinterHead name=\u00a0\u00bbStandard printhead (v2)\u00a0\u00bb><\/span>
    \n<fan_speed>50<\/fan_speed><\/span>
    \n<cool_min_layer_time>10<\/cool_min_layer_time><\/span>
    \n<\/PrinterHead><\/span>
    \n<PrinterHead name=\u00a0\u00bbNew printhead (v3)\u00a0\u00bb><\/span>
    \n<fan_speed>65<\/fan_speed><\/span>
    \n<cool_min_layer_time>15<\/cool_min_layer_time><\/span>
    \n<\/PrinterHead><\/span>
    \n<\/PrinterHeads><\/span>
    \n<!– Printer definition –><\/span>
    \n<Printer><\/span>
    \n<machine_name>DiscoEasy200<\/machine_name><\/span>
    \n<machine_type>RepRap<\/machine_type><\/span>
    \n<machine_width>211<\/machine_width><\/span>
    \n<machine_depth>211<\/machine_depth><\/span>
    \n<machine_height>205<\/machine_height><\/span>
    \n<extruder_amount>1<\/extruder_amount><\/span>
    \n<has_heated_bed>False<\/has_heated_bed><\/span>
    \n<machine_center_is_zero>False<\/machine_center_is_zero><\/span>
    \n<machine_shape>Square<\/machine_shape><\/span>
    \n<machine_speed_factor>1.0<\/machine_speed_factor><\/span>
    \n<nozzle_size>0.4<\/nozzle_size><\/span>
    \n<extruder_head_size_min_x>17<\/extruder_head_size_min_x><\/span>
    \n<extruder_head_size_min_y>40<\/extruder_head_size_min_y><\/span>
    \n<extruder_head_size_max_x>17<\/extruder_head_size_max_x><\/span>
    \n<extruder_head_size_max_y>70<\/extruder_head_size_max_y><\/span>
    \n<extruder_head_size_height>10<\/extruder_head_size_height><\/span>
    \n<retraction_enable>True<\/retraction_enable><\/span>
    \n<\/Printer><\/span>
    \n<!– Global configuration –><\/span>
    \n<Configuration><\/span>
    \n<bottom_thickness>0.26<\/bottom_thickness><\/span>
    \n<layer0_width_factor>100<\/layer0_width_factor><\/span>
    \n<object_sink>0<\/object_sink><\/span>
    \n<fan_enabled>True<\/fan_enabled><\/span>
    \n<retraction_min_travel>1.5<\/retraction_min_travel><\/span>
    \n<retraction_combing>All<\/retraction_combing><\/span>
    \n<retraction_minimal_extrusion>0.02<\/retraction_minimal_extrusion><\/span>
    \n<retraction_hop>0<\/retraction_hop><\/span>
    \n<skirt_line_count>2<\/skirt_line_count><\/span>
    \n<skirt_gap>3<\/skirt_gap><\/span>
    \n<skirt_minimal_length>150<\/skirt_minimal_length><\/span>
    \n<fan_full_height>0.5<\/fan_full_height><\/span>
    \n<fan_speed_max>100<\/fan_speed_max><\/span>
    \n<cool_min_feedrate>20<\/cool_min_feedrate><\/span>
    \n<cool_head_lift>False<\/cool_head_lift><\/span>
    \n<solid_top>True<\/solid_top><\/span>
    \n<solid_bottom>True<\/solid_bottom><\/span>
    \n<fill_overlap>25<\/fill_overlap><\/span>
    \n<support_type>Lines<\/support_type><\/span>
    \n<support_angle>50<\/support_angle><\/span>
    \n<support_fill_rate>20<\/support_fill_rate><\/span>
    \n<support_xy_distance>0.7<\/support_xy_distance><\/span>
    \n<support_z_distance>0.15<\/support_z_distance><\/span>
    \n<simple_mode>False<\/simple_mode><\/span>
    \n<brim_line_count>10<\/brim_line_count><\/span>
    \n<raft_margin>5<\/raft_margin><\/span>
    \n<raft_line_spacing>3<\/raft_line_spacing><\/span>
    \n<raft_base_thickness>0.3<\/raft_base_thickness><\/span>
    \n<raft_base_linewidth>1<\/raft_base_linewidth><\/span>
    \n<raft_interface_thickness>0.27<\/raft_interface_thickness><\/span>
    \n<raft_interface_linewidth>0.4<\/raft_interface_linewidth><\/span>
    \n<raft_airgap>0.22<\/raft_airgap><\/span>
    \n<raft_surface_layers>2<\/raft_surface_layers><\/span>
    \n<fix_horrible_union_all_type_a>True<\/fix_horrible_union_all_type_a><\/span>
    \n<fix_horrible_union_all_type_b>False<\/fix_horrible_union_all_type_b><\/span>
    \n<fix_horrible_use_open_bits>False<\/fix_horrible_use_open_bits><\/span>
    \n<fix_horrible_extensive_stitching>False<\/fix_horrible_extensive_stitching><\/span>
    \n<auto_detect_sd>True<\/auto_detect_sd><\/span>
    \n<\/Configuration><\/span>
    \n<!– Gcodes start and end –><\/span>
    \n<GCODE><\/span>
    \n<Gstart><\/span>
    \n;Gcode by Cura by Dagoma {cbd_version} for DiscoEasy200<\/span>
    \n;Filament: {filament_name}<\/span>
    \nG90 ;absolute positioning<\/span>
    \nM106 S250 ;fan on for the sensor<\/span>
    \nG28 X Y<\/span>
    \nG1 X50<\/span>
    \nM109 S180<\/span>
    \nG28<\/span>
    \nM104 S{print_temperature}<\/span>
    \n;Sensor activation<\/span>
    \n;{sensor}<\/span>
    \nM107 ;start with the fan off<\/span>
    \nG1 X100 Y20 F3000<\/span>
    \nG1 Z0.5<\/span>
    \nM109 S{print_temperature}<\/span>
    \nM82 ;set extruder to absolute mode<\/span>
    \nG92 E0 ;zero the extruded length<\/span>
    \nG1 F200 E10 ;extrude 10mm of feed stock<\/span>
    \nG92 E0 ;zero the extruded length again<\/span>
    \nG1 Z3<\/span>
    \nG1 F{travel_speed}<\/span>
    \n<\/Gstart><\/span>
    \n<Gend><\/span>
    \nM104 S0<\/span>
    \nM106 S255 ;start fan full power<\/span>
    \nM140 S0 ;heated bed heater off (if you have it)<\/span>
    \n;Home machine<\/span>
    \nG91 ;relative positioning<\/span>
    \nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure<\/span>
    \nG1 Z+3 F{travel_speed} ;move Z up a bit and retract filament even more<\/span>
    \nG90<\/span>
    \nG28 X Y<\/span>
    \n;Forced ventilation<\/span>
    \nM107 ;stop fan<\/span>
    \n;Shut down motor<\/span>
    \nM84 ;shut down motors<\/span>
    \n<\/Gend><\/span>
    \n<\/GCODE><\/span>
    \n<\/Dagoma><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

    Pour une imprimante d’entr\u00e9e de gamme, Dagoma a eu la tr\u00e8s bonne id\u00e9e de fournir un slicer totalement configur\u00e9 nativement pour \u00e9viter \u00e0 l’utilisateur de se poser trop de questions. Il s’agit d’une version customis\u00e9e du slicer Cura (dont je parlerais dans une autre page). Le mode op\u00e9ratoire est on ne peut plus simple : … <\/p>\n

    Continuer la lecture de « Les slicers – Cura by Dagoma »<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"categories":[66],"tags":[],"class_list":["post-304","page","type-page","status-publish","hentry","category-outils"],"_links":{"self":[{"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/pages\/304","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/comments?post=304"}],"version-history":[{"count":0,"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/pages\/304\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/media?parent=304"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/categories?post=304"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.aacmb.fr\/wordpress\/wp-json\/wp\/v2\/tags?post=304"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}